Home

Products

Intercoms

Accesories

Contact us

Visitor

Hit Counter

We represent a wide variety of manufacturers and are able to offer a solution to most if not all, residential and commercial access control systems.  We now carry a complete range of Digital Camera Recording Systems.

Commercial gate operator

Ram 300 Swing Gate Operator

Electronic Features

Control Board:Ramset Ram 300 swing gate operator,automatic gate operator,electric gate operator,security gate opener and operator,door gate operator,commercial gate operator,residential gate operator
Ramset’s Intelligate" Control Board is for operating a vehicular gate operator; the control board is available for either 110VAC or 220VAC, single phase, applications; the control board contains self adjusting ERD, left hand/right hand operation control, lead/lag capability, one-pass anti-tailgating, and options for 4 different gate addresses; the control board also includes a rectified 24VAC, transformer

Electronic Reversing Device:
innovative ERD system that monitors current fluctuation; self-adjusting ERD reverses when obstruction is sensed

Electronic Inputs:
phone entry systems, three push button stations, radio receivers, fire boxes, digital key pads, loop detectors, photo cells, etc.

Automatic Timer:
gate closes automatically after desired amount of time (0, 5, 10, 15, 30, 45 or 60 seconds)

Master / Slave:
RS-485 multinode communication interface synchronizes movement between two gates

Open Delay / Close Delay:
integrated delay of 1 second between master and slave
Ramset keypads,Ramset keyless entry,Ramset gate opener controls,ramset access control,gate opener controllers,Ramset digital keypads,numeric keypads

Magnetic Lock:
24 VDC; lock connects directly to Intelligate Control Board

Relay:
two integrated relays to use accessories such us alarms, lights, locks or cctv

Micro Bright LED'S:
show status of gate operator

Right/Left Hand Operation:
dip switch changes direction for right/left hand operation

 
 Mechanical Specifications

 
Power Input: 120 VAC

Electric Motor:
continuous duty 1/2 hp, 120 VAC., 4.5 amp, with high speed ball bearings

Capacitor:
aerovox 65uf 240V; 50/60 hertz protected S 10000 AFC

Cycles:
30 cycles per hour

On/Off Switch:
120 VAC & two outlets

Maximum Gate Size & Weight:
capable to move gates up to 18’ @ 800 lbs.

Gate Traveling Speed:
approximately 14" per 90º

Reduction:
by worm gear box continuously lubricated in an oil bath
Chassis:
heavy duty metal cut and formed by CNC machinery

Finish:
gold/zinc plated to inhibit corrosion

Gate Stops:
with limit switches

Cover:
polyethylene, high-impact resistance

Color:
charcoal gray

Shipping Weight:
110 lbs.

Emergency Release:
Ramset's exclusive foot pedal release disengages gate from motor for manual operation; an optional battery back up system is also available
 

Top of the page

Ram 3000/3100/3200 Swing Gate Operator

Electronic Features
Ramset gate openers,Ram 3000 gate operators,swing gate openers,gate closers,remote operated gates,automatic gate openers,electric gate openers,swing gate opener

Control Board:
easy to configure solid state board with features such as L.E.D. readouts to indicate status of operator at all times

Electronic Reversing Device (ERD):
two separate adjustments for reversing when encountering obstruction during opening or closing; reverses for 1 second and stops

Audio Alarm:
audio alarm will sound for approximately six minutes, but only when the gate hits an obstruction twice; input to reset alarm included

Automatic Timer:
can be set from 0 to 60 seconds

Maximum Running Timer:
motor shuts off after 60 seconds

Master/Slave:
Included five wire connection plug to synchronize movement between two gates

Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock

 

Mechanical Specifications

 
Motor:
Ram-3000: instant reversing 1/2 HP, 120 VAC, 4.5 amp, 1625 rpm with high speed ball bearings
Ram-3100: instant reversing 3/4 HP, 120 VAC, 8.2 amp, 1625 rpm with high speed ball bearings
Ram-3200: instant reversing 1 HP, 220 VAC, 4.5 amp, 1625 rpm continuous duty motor

Maximum Gate Size & Weight
Ram-3000: 22' @800 lbs.
Ram-3100: 22' @ 1200 lbs.
Ram-3200: 22' @1200 lbs.

Cycles:
capable of continuous operation under appropriate load

Gate Traveling Speed:
approximately 18 seconds per 90 degrees
 
Speed Reducer:
two high quality worm gear reducers continuously lubricated in an oil bath

Cover:
black heavy-duty fiberglass with high gloss finish (optional access door for cover)

Emergency Release:
hand lever release or optional battery back-up system (bbs-2000)

Shipping Weight:
120 lbs. / 145 lbs. / 155 lbs.

Warranty:
10-Years limited warranty

 
 

Top of the page

      Ram 30-30 Swing Gate Operator

Electronic Features
Ramset Ram 30-30 swing gate openers,swing gate operators,automatic gate openers,electric gate openers,single gate openers,residential gate openers,commercial gate openers

Intelligent Control Board:
a reliable way to open and close gates continuously

Surge Protection:
gas discharge filter and MOV increases protection against surges and lightning strikes

Electronic Reversing Device (ERD):
innovative system that monitors current fluctuation; self-adjusting and reverses when obstruction is sensed

Electronic Inputs:
phone entry systems, three push button stations, radio receivers, fire boxes, digital key pads, loop detectors, photo cells, etc.

Automatic Timer:
gate closes automatically after desired amount of time (0, 5, 10, 15, 30, 45 or 60 seconds)

Master/Slave:
RS-485 multi node communication interface synchronizes movement between two gates

LAG/MODE LAG/DELAY:
integrated delay of 1 second between master and slave

Magnetic Lock:
24 VDC; lock connects directly to intelligent control board

Relay:
two integrated relays to use accessories such us alarms, lights, locks or cctv

Status of Gate:
micro bright L.E.D.s to show status of gate operator

Running Direction:
dip switch changes direction for right/left hand operation

 Mechanical Specifications

Power Input:
120 VAC

Electric Motor:
continuous duty 3/4 hp, 120 VAC; 8.5 amp, 1,625 rpm with high speed ball bearings

Capacitor:
aerovox 65 uf; 240V. 50 / 60 hertz protected S 10,000 AFC

Cycles:
continuous

On/Off Switch:
120 VAC and two outlets

Maximum Gate Size & Weight:
capable to move gates up to 20’ @ 3000 lbs.

Gate Traveling Speed:
approximately 14" per 90 degrees

 
Finish:
on gold/zinc plated to inhibit corrosion

Gate Stops:
with limit switches

Cover:
polyethylene, high-impact resistance

Color:
charcoal gray

Emergency Release:
exclusive foot pedal release disengages gate from motor so it can be opened manually; an optional battery back up system is also available

Shipping Weight:
365 lbs.

Warranty:
10-Years limited warranty

 
 

 Top of the page

Ram 1000 Slide Gate Operator

Electronic Features
Ramset Ram 1000 slide gate operators,sliding gate operators,electric gate operators,door gate operators,commercial gate operators,residential gate operators,parking gate operators

Control Board:
Ramset’s "Intelligate" Control Board is for operating a vehicular gate operator. The control board is available for either 110VAC or 220VAC, single phase, applications. The control board contains self adjusting ERD, left hand/right hand operation control, lead/lag capability, one-pass anti-tailgating, and options for 4 different gate addresses. The control board also includes a rectified 24V, 750mA, output for providing power to peripheral devices such as radio receivers, keypads, alarms, phone entry systems, safety detectors... etc.

Electronic Reversing Device:
innovative ERD system that monitors current fluctuation; self-adjusting ERD reverses when obstruction is sensed

Electronic Inputs:
phone entry systems, three push button stations, radio receivers, fire boxes, digital key pads, loop detectors, photo cells, etc.

Automatic Timer:
gate closes automatically after desired amount of time (0, 5, 10, 15, 30, 45 or 60 seconds)

Master / Slave:
RS-485 Multinode communication interface synchronizes movement between two gates

Open Delay / Close Delay:
integrated delay of 1 second between master and slave

Magnetic Lock:
24 VDC. Lock connects directly to Intelligate Control Board

Relay:
two integrated relays to use accessories such us alarms, lights,locks or cctv

Micro Bright LED'S:
show status of gate operator

Right/Left Hand Operation:
Dip switch changes direction for right/left hand operation

Maximum Running Timer:
60 Seconds.

     Mechanical Specifications
 

Power Input:
120 VAC

Electric Motor:
continuous duty 1/2 hp, 120 VAC. 4. 5 amp, with high speed ball bearings

Cycles:
continuous

On/Off Switch:
120 VAC & two outlets

Maximum Gate Size & Weight:
capable to move gates up to 35’ @ 1,000 lbs.

Gate Traveling Speed:
approximately 12" per second

Reduction:
by worm gear box continuously lubricated in an oil bath

Chassis:
heavy Duty metal cut and formed by CNC machinery
Finish:
gold/zinc plated to inhibit corrosion

Gate Stops:
with limit switches

Chain:
20’ of nickel/plated chain to inhibit corrosion

Cover:
polyethylene, high-impact resistance

Color:
charcoal gray

Shipping Weight:
95 lbs.

Emergency Release:
Ramset's exclusive foot pedal release disengages gate from motor for manual operation. An optional battery back up system is also available
 

   Top of the page

 Ram 5000/5100/5200 Slide Gate Operator

Electronic Features
Ramset Ram 5000 gate openers,slide gate openers,electric gate openers,commercial gate openers,sliding gate operators,sliding gate openers,auto gate openers,single gate openers

Control Board:
easy to configure solid state board with features such as L.E.D. readouts to indicate status of operator at all times

Electronic Reversing Device (ERD):
two separate adjustments for reversing when encountering obstruction during opening or closing; reverses for 1 second and stops

Audio Alarm:
audio alarm will sound for approximately six minutes, but only when the gate hits an obstruction twice; input to reset alarm included

Automatic Timer:
can be set from 0 to 60 seconds

Maximum Running Timer:
motor shuts off after 60 seconds

Master/Slave:
included five wire connection to synchronize movement between two gates

Electronic Inputs:
for radio receiver, fire department box, numeric key pad, metal detector, center loop, telephone entry system, three button station, photo cell, safety edge and magnetic lock

Mechanical Specifications
 

Motor:
Ram-5000 - instant reversing 1/2 HP, 120 VAC, 4.5 amp, 1625 rpm with high speed ball bearings
Ram-5100 - instant reversing 3/4 HP, 120 VAC, 8.2 amp, 1625 rpm with high speed ball bearings
Ram-5200 - instant reversing 1 HP, 220 VAC, 4.5 amp, 1625 rpm continuous duty motor

Maximum Gate Size:
Ram-5000 - 38' @ 1000 lbs.
Ram-5100 - 40' @ 2000 lbs.
Ram-5200 - 40' @ 3000 lbs.

Cycles:
capable of continuous operation under appropriate load

Gate Traveling Speed:
approximately 12" per second

Chassis:
robust 1/4" hot rolled metal, sanded, and zinc/gold plated to inhibit corrosion

Speed Reducer:
high quality worm gear reducer continuously lubricated in an oil bath
Cover:
black heavy-duty fiberglass with high gloss finish

Emergency Release:
hand crank release or optional battery back-up system (bbs-2000)

Shipping Weight:
120 lbs./145 lbs./155 lbs.

Warranty:
10-Years limited warranty
 

Top of the page

   Ram 5500 Slide Gate Operator

Electronic Features
Ramset slide gate operators,Ram 5500 slide gate openers,sliding gate openers,gate auto close systems,remote gate openers,driveway gate openers,electric gate operators,automatic gate operators

Control Board:
Ramset’s "Intelligate" Control Board is for operating a vehicular gate operator; the control board is available for either 110VAC or 220VAC, single phase applications; the control board contains self adjusting ERD, left hand/right hand operation control, lead/lag capability, one-pass anti-tailgating, and options for 4 different gate addresses; the control board also includes a rectified 24V, 750mA, output for providing power to peripheral devices such as radio receivers, keypads, alarms, phone entry systems, safety detectors... etc.

Electronic Reversing Device:
innovative ERD system that monitors current fluctuation; self-adjusting ERD reverses when obstruction is sensed

Electronic Inputs:
phone entry systems, three push button stations, radio receivers, fire boxes, digital key pads, loop detectors, photo cells, etc.

Automatic Timer:
gate closes automatically after desired amount of time (0, 5, 10, 15, 30, 45 or 60 seconds)

Master / Slave:
RS-485 multinode communication interface synchronizes movement between two gates

Open Delay / Close Delay:
integrated delay of 1 second between master and slave

Magnetic Lock:
24 VDC; lock connects directly to Intelligate Control Board

Relay:
two integrated relays to use accessories such us alarms, lights, locks or cctv

Micro Bright LED'S:
show status of gate operator

Right/Left Hand Operation:
dip switch changes direction for right/left hand operation

Maximum Running Timer:
60 Seconds

Mechanical Specifications
 

Power Input:
120 VAC

Electric Motor:
continuous duty 3/4 hp, 120 VAC., 8.5 amp, with high speed ball bearings

Cycles:
continuous

On/Off Switch:
120 VAC & two outlets

Maximum Gate Size & Weight:
capable to move gates up to 45’ @ 1,500 lbs.

Gate Traveling Speed:
approximately 12" per second

Reduction:
by worm gear box continuously lubricated in an oil bath

Chassis:
heavy duty metal cut and formed by CNC machinery
Finish:
gold/zinc plated to inhibit corrosion

Gate Stops:
with limit switches

Chain:
20’ of nickel/plated chain to inhibit corrosion

Cover:
polyethylene, high-impact resistance

Color:
charcoal gray

Shipping Weight:
95 lbs.

Emergency Release:
Ramset's exclusive foot pedal release disengages gate from motor for manual operation; an optional battery back up system is also available

 

Proudly Serving Southern California Since 1998