Home

Products

Intercoms

Accesories

Contact us

Visitor

Hit Counter

 

We represent a wide variety of manufacturers and are able to offer a solution to most if not all, residential and commercial access control systems.  We now carry a complete range of Digital Camera Recording Systems.

INTERCOMS / TELEPHONE ENTRY SYSTEMS

 

Top of the page

Download DKS Manual:

Manual 1810

Top of the page

Download Sentex Manuals:

Crown JewelSpectrumHorizonOvationInfinity

Top of the page

Download LINEAR Manual:

LINEAR

Top of the page

 

AeGIS 4000
 

 

  • Hands Free Single Phone Line “ Non Subscriber”
  • Telephone Entry Access System.
  • Uses existing phone line or dedicated phone line (two systems   
    can be installed).
  • Optional Radio Receiver.
  • Programming local via built-in keypad or remote via a touch tone phone.
  • Remote Access press 9 to unlock door 1 or press 8 to unlock door 2 or optional Radio Transmitter
  • Local Access keypad entry code (50 programmable codes).
  • Distinctive Ringing.
  • Call Waiting.
  • Automatic and Manual Call Forwarding to call a secondary phone number.
  • Built Auxiliary Input for radio frequency receiver, timer,
  • free exit switch, panic bar, etc.
  • Recess Keypad w/ Built-in night light.
  • Brushed Stainless Steel
  • Plating Faceplate. Outdoor or Indoor.
  • Surface Mount. Outdoor or Indoor.
SPECIFICATIONS

Power Input: 12VAC 40VA UL Listed Transformer (supplied) 
or 12VDC 40VA (output reading must be 13.5 - 14.5 VDC).
Current Consumption: 420 mA idle, 620 mA operating.
Emergency Battery: 12 VDC 4 Ahr rechargeable 
battery with 12 VDC charger (not supplied).
Operating Environment: 0°F to 140°F 
Relative Humidity 0 % - 95 % noncondensing.
Relay: Two built in relays. Form C Dry Contact 120 VAC 10A, 24VDC 10A or 250VAC 7A. Programmable output 01-90 seconds. 
Works behind an analog PBX to call extensions.
Dialing: Tone.

Memory Type: EEPROM (non-volatile).
Programmable Talk Time.
Standard Programming: Via Built-in Keypad or Touch-Tone Phone.
Incoming touch-tones through the microphone are ignored by the system.
Construction: 16 Gauge Cold Rolled Steel back box with enamel finished and Brushed Stainless Steel Faceplate.
Dimensions : 9-1/8” (H) x 6-15/16”(W) x 3-7/8”(D).
Shipping Weight: 8 Lbs. approximate.
“TWO YEARS WARRANTY” includes lightning and power surge if Pach and Company surge protector (ASP1) is installed).

Download Pach & Co Manual:

4000

Top of the page

AeGIS 7000

Pach and Company, AeGIS, telephone door entry, home intercom systems, industrial intercom systems, telephone intercom systems, telephone entry unit, access control systems, intercom systems, keyless entry systemsy

  • Hands Free Multi Tenant Telephone Access Control Systems from 25 to 250 tenants and 25 to 250 4-digit personal access codes.

  • Programming local via system’s keypad or remote via a touch-tone phone.

  • Optional Radio Receiver.

  • Remote Access press 9 to unlock door or optional radio transmitter.

  • Local Access keypad entry code.

  • Backlit Single Line Liquid Crystal Display (LCD) with Electronic Directory. 

  • Postal Lock ready.

  • Recess Keypad w/ Built-in night light, available on surface mount only.

  • Support Voice Mail.

  • Brushed Stainless Steel or Brushed Brass Plating (special order only) Faceplate.

  • Surface or full-flush mount. Outdoor or Indoor.

specifications

Power Input: 12VAC 40VA (supplied) or 12VDC 40VA (output reading must be 13.5-14.5 VDC).
Current Consumption: 500 mA idle, 700 mA operating.
Emergency Battery: Built-in charging circuit for 12VDC, 4Ahr rechargeable battery (battery is not supplied).
Operating Environment: 32°F to 140°F.
Relative Humidity 0 % - 95 % noncondensing.
*  Heater is required if the ambient temperature gets below 32°F
Single relay. Form C Dry Contact 120 VAC 10A, 24VDC 10A or 250VAC 7A.
Tone Detection: Crystal controlled detecting short bursts 80 ms. 
Dialing: Touch-tone or pulse (programmable).
Incoming touch-tone through the microphone are ignored by the system.
Memory Type: EEPROM (non-volatile).
Construction: 16 Gauge Cold Rolled Steel back box with enamel finished and 16 gauge brushed stainless steel or Brushed Brass Plating Faceplate
Dimension Surface : 10-3/4 “(H) x 8-1/2 “(W) x 3-1/8 “(D)
Dimension Full-flush: 10-13/16”(H) x 8-3/8”(W) x 2-7/16(D) Dimension Full-flush Mounting Ring (FFM7 or FM7BZ): Inside: 11-1/8” (H) x 8-11/16”(W) x 2-5/8”(D) 
Outside: 14-5/16” (H) x 12-1/8” (W) 
Mount: Surface and Full-flush (mounting ring is included). Outdoor or Indoor.
Shipping Weight: 11 Lbs. approximate.
“TWO YEARS WARRANTY” includes lightning and power surge if Pach and Company Surge Protector (ASP1) is installed.

Download Pach & Co Manual:

7000

Top of the page

AeGIS 8000

Pach and Company, AeGIS, industrial intercom systems, intercom systems, telephone door entry, home intercom systems, residential intercom systems, entry access control, keyless entry systems, telephone intercom systems


  • Hands Free System from 25 - 250 tenants and 25 - 250 codes. 

  • Programming local via system’s keypad or remote via Pach and Company Management Software (Windows 95, 98, 2000, Me and XP, software is included).

  • Optional Radio Receiver. 

  • Remote Access programmable to user preference.

  • Local Access keypad entry code or radio transmitter.

  • 600 event recording buffer.

  • Backlit Single Line Liquid Crystal Display (LCD) with Electronic Directory.

  • Recess Keypad w/ Built-in night light, available on surface mount only.

  • Support PBX and Voice Mail.

  • Postal Lock ready.

  • Built-in 1200BPS Modem.

  • Surface or Full-flush Mount. Outdoor or Indoor.

  • Brushed Stainless Steel or Brushed Brass Plating 
    (special order only) Faceplate.

specifications

Power Input: 12VAC 40 VA (supplied) or 12VDC 40VA (output reading must be 13.5 - 14.5 VDC).
Emergency Battery: Built-in charging circuit for 12VDC, 4Ahr rechargeable battery (battery is not supplied).
Current Consumption: 500 mA idle, 700 mA operating.
Operating Environment: 32°F to 140°F 
Humidity 0%-95% noncondensing.
* Heater is required if the ambient temperature is below 32°F.
Relay:Two built-in relay with independent strike time. Form C Dry Contact 120VAC10A/ 24VDC10A/ 250VAC 7A.
Dialing: Touch-tone or pulse (programmable).
Tone Detection: Crystal controlled detecting short bursts 80 ms.
Incoming touch-tone through the microphone are ignored by the system.
Memory Type: EEPROM (non-volatile).
Dimension Surface: 10-13/16 “(H) x 8-5/8 “(W) x 3-3/4 “(D).
Dimension Full-flush: 10-13/16”(H) x 8-3/8”(W) x 2-7/16”(D).
Dimension Full-flush Mounting Ring (FFM8 or FM8BZ): Inside: 11-1/8” (H) x 8-11/16”(W) x 2-5/8”(D) 
Outside: 14-5/16” (H) x 12-1/8” (W) 
Construction: 16 gauge cold rolled steel back box with enamel and 16 gauge brushed stainless steel or brushed brass plating faceplate.
Mount: Surface and Full-flush (mounting ring is included), outdoor on indoor.
Shipping Weight: 11 Lbs. approximate.
“Two Years Warranty” includes lightning and power surge if Pach and Company Surge Protector (ASP1) is installed.

Download Pach & Co Manual:

8000

Top of the page

Proudly Serving Southern California Since 1998